We’ve been a bit quiet since last year on our blog here primarily because we have been processing large, ongoing audio archiving digital migration job for Mood Media Ltd

In essence audio archiving, digital migration, transfer or digitisation, whatever term you prefer, is conceptually simple, one analogue or digital format is moved to another, usually digital, format.  It is in the details of this process that things can get complex requiring experience, specialised tools and often custom-built solutions.

This job has many factors not just attaining the best analogue transfers but also addressing the organisation of such a large amount of 10.5″ reels, their digital management once migrated and the creation and management of metadata.

The archive, dating from the 1950′s up the early 90′s, even though it had been stored in less than ideal conditions, is in generally good condition. An interesting and often fantastic sounding collection of recordings and music are evident all recorded at 15ips in mono, stereo and some encoded with Dolby A noise reduction.
There are specific issues with some tapes that are not uncommon with older audio tape:

• Binder hydrolysis or sticky shed syndrome (SSS) has affected a significant proportion of the archive in particular Ampex branded tapes from the 1980′s onwards.
• Some glue used in spices from the 1980′s spreads over time and tends to stick layers of tape adjacent to the splice together. This can be a very frustrating problem which rarely damages the tape but affects the tape tension on certain sections so that head to tape contact is momentarily lost and a very obvious audio glitch noticed.

The Analogue side is important to get correct initially but the management of the data is critical with such a large number of reels and individual artists and tracks. Each batch of tapes would be catalogued in a .csv file. The digital audio transfers were split into individual tracks which then had to be renamed based on the data in the .csv file. This was handled by some php coding which matched the metadata supplied with the files, checking for inconsistencies then renaming the .wav files on one of our servers.

This type of customised workflow can be tricky to setup initially and find the balance between accuracy and speed but once done a smooth workflow is possible maintaining high quality, accuracy and value.

In amongst a batch of very mouldy quarter inch master tapes we were recently asked to look at was this unreleased recording by Shoes for Industry, the Bristol band on Fried Egg Records.

Like much late 1970′s and 80′s studio recordings, this was recorded on Ampex branded tape that suffers badly from binder hydrolysis or ‘sticky shed syndrome’ that must be addressed before the tape can be successfully played and digitised. This was in addition to the mould growth that was evident on the tape pack edges, and cardboard box. Storage in damp conditions and high humidity causes this type of mould and increases the breakdown of magnetic tape generally, sometimes to the point where de-lamination occurs, that is, the binder breaks away from the polyester structure of the tape. When this happens, which is luckily quite rarely, the magnetic information is damaged and mostly lost beyond repair.

Thankfully this tape, whilst it looked in poor condition was relatively straightforward to restore but time consuming. Careful hand winding, and mould cleaning is necessary as is awareness of the potential health effects of some mould spores so good ventilation and protective masks are necessary.

We have recently worked on probably the worst looking tapes but with some of the best sounding music recordings we’ve seen for a while! A batch of 10.5″ NAB studio masters had bad tape mould growth.

Andy Leighton, owner of Bolex Brothers and music publisher of the Rocky Horror Show, found a batch of studio masters on quarter inch tape that had been growing mould for some of them over 30 years. All of these recordings had been made at the renowned Sound and Recording Mobile studios better known as SARM, later creative home of Trevor Horn.

Among these tapes was the first ever recording made at SARM in 1972 by Richard o’Brien, writer of the Rocky Horror Show, in addition to rare tracks by artists such as Kimi and Ritz.

When the tape mould was finally cleaned from the tapes and some of them baked for binder hydrolysis the quality of the recordings was very high and testament to the high quality available from analogue recording and even though tape can be vulnerable to physical problems it is also robust. If these had been tape based digital recordings, in the same condition, I doubt we’d have been able to achieve the same results.

We were contacted recently by Jack Hawkins, the renowned arranger and band leader to consult on and digitize personal quarter inch open reel recordings of his band.

In case you don’t know, The Jack Hawkins band are probably best known for their performance of the track 30-60-90 made famous in a club sequence in the 1971 film Get Carter starring Michael Caine.

The capstan drive tape recorder is (or was) very common and was used in a huge range of cassette tape audio, video and open reel machines from cheap domestic to very expensive broadcast tape machines.

Occasionally we receive quarter inch tapes, always be on small 3 inch spools, that reproduce on our capstan drive machines with terrible speed variation. They start off very fast then gradually slow down over the duration of the recording to around normal speed.

These reels must have been recorded on rim drive machines. These type of open reel tape recorders didn’t use a capstan and pinch roller to save space and more often cost. As there is no capstan, as the supply reel gets smaller the tape recording speed increases. When replayed on a rim drive machine the speed, while not likely to be ‘Studer stable’ will be pretty stable and the recording sound OK.

It’s not feasible or desirable for us to own unlimited machines of all types due to the time to service and repair them, find parts and storage space therefore we use a small range of carefully picked high quality tape machines that with care can replay most tapes, speeds and track formats. This is the problem with rim drive recordings and an analogue or digital solution must be found.

The tapes we received were 15 reels of family recordings from the Welsh Valleys. Others apparently had tried to transfer these tapes but gave up finding no material. This was easily solved as the tapes were wound the opposite way to normal so the oxide was facing out not in. This is the same as in audio cassettes. The original tape machine must have had it’s heads in a similar position to a cassette machine.

One of our recent and ongoing jobs is a very large, over 2000, NAB 10.5 inch reel to reel archive of quarter inch professional tape recordings.

To fit into the budget but maintain quality we needed to find a way to streamline our workflow in converting the high resolution 24 bit 96 Khz master .wav  files to CD quality (16 bit / 44 Khz) and MP3 (320 kbps) audio files.

Typically this would be done manually with 2 track audio software such as Audacity, Peak Audio Tools, Wavelab, etc with a Graphic User Interface (GUI). For such a large amount of individual files this is time consuming, expensive and unnecessary. While many audio editors have batch processing tools, Amadeus Pro being one of our favourites, they are still not as flexible as combining command line tools with a Bash script.

SoX is a powerful command line audio tool that can be used to edit, convert, process, record and play a wide range of digital audio files. It also has a very high quality resampling algorithm which we are using here.

Once the tape reels have been digitised they are split into individual .wav files which are then renamed with artist and track details using a php script that accesses a .csv file. These 24/96 resolution files are then converted to lower, CD resolution using SoX and to 320 kb/s MP3′s using LAME. The script also uses sed, the stream editor, to add the text _16_44.wav or _mp3.mp3 to the filename for ease of identification. The script finds all files with the suffix _24_96.wav in all the subdirectories of it’s working directory and processes these.

At the moment this script is running under Mac OS X 10.5.8 using the MacPorts project but will, in time, be moved to one of our Apple G4 servers running the PowerPC version of Debian GNU/Linux 5.05 ‘Lenny’.

We have two of these excellent machines in addition to our Sony APR 5003 and Studer A80′s. The Tascam BR-20 was Tascam’s last and top of the range 1/4 inch reel to reel tape machine and available in two track stereo and stereo with centre timecode option.

The capstan drive in the BR20 is belt driven by a wide belt. Both belts in our machines looked OK but we’ve replaced all roller bearings, belts and pinch rollers in both of our machines anyway as a matter of course. These parts are still available from Teac UK via Acoustic Services on 01-844-347600.

Below is a simple explanation of how to change the capstan belt.

1. Unplug machine from mains power and move to a strong stable base.
2. Remove cross head screws from the rear panel and lift plate off. Depending on the type of plug in your country you may not be able to remove it completely.
3. You’ll now be able to see the capstan motor and it’s control board attached to it.
4. Remove the 4 cross head screws and gently lift the analogue audio output board away from the machine as in the picture above.
5. We now need to remove the whole capstan motor assembly with the control board still attached. Remove the 4 cross head screws right at the front of the assembly, NOT the six nearest to you when looking at this image. 
6. Carefully unclip the 4 cable connectors from the motor control board. The other connector cannot be removed from the board and must be removed where it connects to the other board.
7. The whole assembly can now be lifted out from the machine. Be careful to not snag any cables and remember to unclip the black cable ties.
8. You’ll now be able to unclip the control board from the assembly by carefully compressing the black clips with some needle nose pliers.
   
9. Now remove the six cross head screws holding the capstan motor assembly together. This is the only way to remove and refit the capstan belt. There’s not enough room to do it any other way!
10. Now you can remove the old belt and capstan shaft. It’s a good idea to clean the capstan with IPA where the old belt has run and reapply a little grease to the bearing end of the capstan.
11. Fit your new belt and reassembly is the reverse of dissasembly! Be careful though to not drop the screws into regions you can’t get them out of – luckily there aren’t that many on this machine but a long magnetic screwdriver is very useful.. just don’t get it anywhere near the headblock and heads!